M Squared Training Academy

Online safety training from M Squared Safety, in English and Spanish, covering OSHA, Cal/OSHA, DOT, California sexual harassment prevention, and heat and wildfire smoke rules in California, Washington, Oregon, Maryland and Nevada, for construction, general industry, and oil and gas. Every course has lessons, practice questions, a final exam you have to pass, and a certificate of completion from M Squared Safety Solutions, Inc. An M Squared trainer answers questions in English or Spanish, Monday to Friday, 8 AM to 5 PM Pacific time, at 949-954-6581.

Where the federal and California rules differ, each course comes in two versions: Federal OSHA, for workers outside California, and Cal/OSHA, for California workers. Topics covered only by California rules have a Cal/OSHA course.

Not sure which version you need? See OSHA training requirements by state. Looking for one topic? Start with bloodborne pathogens training online. More topic guides: HazCom training online, Forklift operator training online, Fall protection training, Workplace violence prevention training, Lockout/tagout training online, Confined space training online and Heat illness and wildfire smoke training.

Federal OSHA or Cal/OSHA?

Your situation Take this version
Work in California, under Cal/OSHA Cal/OSHA
Work in any other state Federal OSHA
Hazard Communication (GHS), HAZWOPER First Responder Awareness, Job Hazard Analysis, Industrial Hygiene Basics, Safe Lifting and Ergonomics, Spray Pump Safety, PPE in General Industry, or the Forklift and Confined Space Entrant classroom parts One combined course covers Federal OSHA and Cal/OSHA
Heat illness, wildfire smoke, valley fever, IIPP, workplace violence prevention or refinery process safety Cal/OSHA version only
Heat illness or wildfire smoke in Washington, Oregon, Maryland or Nevada The course for your state's rule (see the state heat and wildfire smoke list below)
PSM for Contract Employees Federal OSHA version only
DOT Reasonable Suspicion for Supervisors One course under the federal FMCSA rule (49 CFR 382.603)
Sexual harassment prevention for employees or supervisors California course (not an OSHA topic)

Some states run their own OSHA-approved State Plan. A State Plan must be at least as effective as federal OSHA (OSHA, State Plans) and may have different or more stringent requirements (OSHA, Fall Protection Standards). The Federal OSHA version teaches the federal rules, so if you work in a State Plan state other than California, check that state's rules as well.

How it works

  1. Buy a seat. One seat per worker.
  2. Get your login by email. It arrives within minutes of your order.
  3. Train at your own pace. On a phone, tablet or computer. Your progress saves as you go. The final exam opens after at least 60 minutes of active study.
  4. Pass the final exam. 25 questions (50 for HAZWOPER First Responder Awareness), 80 percent to pass, 3 attempts. When you pass, you print your certificate. It expires 1 year after it is issued, and M Squared keeps your training record.
  5. Print your certificate within 7 days. You have 7 days after you pass to print or download it. After that your login may be closed, and you will have to submit a request to info@msquaredsafety.com to receive your certificate.

Online courses

Fall protection, ladders and scaffolds

Construction hazards

Health hazards

Heat illness and wildfire smoke rules in other states

These courses teach the heat illness or wildfire smoke rule of one state. For California, see the Cal/OSHA courses above. All are $38.

Programs and emergencies

General industry

Oil, gas and process safety

Online plus hands-on: classroom parts

Online plus hands-on. The classroom part is online. The hands-on part is either an evaluation by your employer with M Squared's checklist, or a session at our San Clemente office that you schedule inside the course. Your certificate is issued after the hands-on part.

  • Forklift Operator Training, Classroom Part, $38
    Federal OSHA and Cal/OSHA in one course: English · Español
  • Confined Space Entrant and Attendant in Construction, Classroom Part, $38
    Federal OSHA and Cal/OSHA in one course: English · Español
  • Confined Space Entrant and Attendant in General Industry, Classroom Part, $38
    Federal OSHA and Cal/OSHA in one course: English · Español
  • Electrical Safety for Qualified Persons, Classroom Part, $60
    Cal/OSHA: English · Español
  • Electrical Safety for Qualified Persons in General Industry, Classroom Part, $60
    Federal OSHA: English · Español

Browse by collection: Construction · General industry · Cal/OSHA · Federal OSHA · Cursos en español

Fall protection, ladder and scaffold courses: before you use your equipment on the job for the first time, ask your supervisor to check how you use it. Need a harness? Shop harnesses from M Squared Safety.

Workplace violence prevention: your employer reviews its own workplace violence prevention plan with you. No plan yet? M Squared Safety writes them. Book a call.

Tool Box Talk Library

128 ready-to-use toolbox talks for crew safety meetings, each in English and Spanish with a sign-in sheet. $10 a talk, or $500 for the full library. Printable PDF, instant download.

Browse all 128 toolbox talks or get the full library.

Your employer's part

An online course does not replace the training your employer must give on your own job: site-specific training, and hands-on practice and evaluation where the rule requires them.

Refunds

Full refund if you have not opened the course. Once a course is started, it cannot be refunded.

Live classes

  • OSHA 10-Hour and 30-Hour, Construction and General Industry (OSHA Outreach Training Program): in-person or Zoom/Teams delivered

Training a crew?

Buy a seat for each worker. For crew orders, on-site classes and courses not listed here, see on-site training or call 949-954-6581.

Who builds and checks the courses

Matt Horovitz runs M Squared Safety from our office at 981 Calle Negocio, Suite 200, in San Clemente, California. He has about 20 years in construction safety, and M Squared Safety has almost 15 years of operating history. Over nearly 15 years our inspectors have completed almost 10,000 safety inspections, most of them on Southern California jobsites and facilities.

Every course is checked against the published standard it cites, and each course page names the standard it covers, so you can read it yourself. Questions during a course go to an M Squared trainer by phone, in English or Spanish, Monday to Friday, 8 AM to 5 PM Pacific, at 949-954-6581. More about M Squared Safety.

Questions about online safety training

Is online safety training accepted, and what does the employer still have to do?

Online training can be part of the training a rule requires, but not all of it. OSHA's position is that online training by itself does not satisfy OSHA training requirements unless it has interactive and hands-on parts. Workers must be able to ask a qualified trainer questions and get answers in a timely manner, and they need hands-on training, working with equipment and tools in the presence of a qualified trainer (OSHA letter of interpretation, July 11, 2019). OSHA names a telephone hotline to a qualified trainer during the online training as one way to give workers that chance. OSHA also urges employers to be wary of relying only on generic, packaged training programs (OSHA letter of interpretation, November 22, 1994).

Our courses cover the classroom part, and an M Squared trainer answers questions by phone. The employer still gives training on the worker's own site and tasks, the hands-on practice, and any practical evaluation a rule requires. Forklift operator training, for example, must combine formal instruction, practical training and an evaluation of the operator's performance in the workplace (29 CFR 1910.178(l)(2)(ii)).

When does Hazard Communication training have to happen?

At the worker's initial assignment, and again when a new chemical hazard comes into the work area. Federal OSHA requires training at the time of initial assignment and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area (29 CFR 1910.1200(h)(1)). Cal/OSHA requires it at the time of initial assignment and whenever a new chemical hazard is introduced into the work area (8 CCR 5194(h)(1)). Neither section sets a fixed retraining interval.

How often is California workplace violence prevention training required?

Every year. California's workplace violence prevention law, Labor Code section 6401.9, was added by SB 553 (Cal/OSHA, Workplace Violence Prevention Laws in General Industry). It requires initial training and annual training after that. Employers must also give additional training when new or previously unidentified workplace violence hazards are found or the plan changes. The training must match workers' education, reading skills and language, and must include a chance for interactive discussion with someone who knows the employer's plan (Cal/OSHA, Workplace Violence Prevention in General Industry: Information for Employers). Our course covers the law and the general hazards. Your employer reviews its own plan with you.

How long is the certificate valid?

An M Squared certificate expires 1 year after it is issued. Where a rule sets its own retraining schedule, the employer follows the rule. For example, bloodborne pathogens training is required at least annually (29 CFR 1910.1030(g)(2)(ii)(B)), asbestos training at least annually (29 CFR 1926.1101(k)(9)(ii); 8 CCR 1529(k)(9)(B)), and a forklift operator's performance evaluation at least once every three years (29 CFR 1910.178(l)(4)(iii)).

Is there a Spanish version?

Yes. Every course on this page has an English version and a Spanish version: use the Español link next to each course. The trainer phone line answers in English and Spanish. OSHA's policy is that employers must train workers in a language and vocabulary they can understand, so a worker who does not speak or understand English must be trained in a language the worker can understand (OSHA Training Standards Policy Statement, April 28, 2010).

How do I train a crew?

Buy one seat for each worker. Each seat is one learner with their own login, and the certificate goes only to the learner who completed the course. For crew orders, on-site classes and courses not listed here, call 949-954-6581.

How long does a course take?

You study at your own pace. In most courses the final exam opens after at least 60 minutes of active study. Two topics have longer timed minimums because their rules set a minimum training time. For DOT Reasonable Suspicion for Supervisors, the rule requires at least 60 minutes of training on alcohol misuse and at least an additional 60 minutes on controlled substances use (49 CFR 382.603). For Asbestos Awareness: Class IV and Housekeeping, Class IV asbestos training must take at least 2 hours (29 CFR 1926.1101(k)(9)(vi); 8 CCR 1529(k)(9)(F)).

Taken a course or worked with M Squared? Tell other people what it was like.

Leave a Review