{"title":"Roof Anchors","description":"\u003cp\u003eRoof anchors and rooftop tie-off points for roofing and solar crews across the U.S. and Canada. M Squared Safety carries reusable and single-use roof anchors, standing-seam anchors, ridge and peak straps, and permanent anchor plates from Malta Dynamics and Palmer Safety, all meeting ANSI Z359 and OSHA anchorage requirements. Ships nationwide. Not sure which anchor suits your roof? Call 949-954-6581.\u003c\/p\u003e\n\u003cp\u003eThe 5,000 pound per employee anchorage requirement in 1910.140(c)(13) and 1926.502(d)(15), and the building owner duty under 1910.27(b)(1) to have anchorages certified, inspected annually and recertified at least every 10 years, are worked through in \u003ca href=\"\/blogs\/news\/roof-anchor-requirements\"\u003eroof anchors: the 5,000 pound rule and the 10 year recertification\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat is a non-penetrating roof anchor?\u003c\/h2\u003e\n\u003cp\u003eA non-penetrating roof anchor is an anchorage connector that creates a fall protection tie-off point without drilling, screwing or welding through the roof deck. It holds position by ballast weight, by clamping to a standing seam, or by gripping a parapet or structural edge, leaving the membrane intact.\u003c\/p\u003e\n\u003cp\u003eThe reason crews ask for one is almost never the anchor. It is the roof. On a building under an active single-ply warranty, a bolted anchor means a new penetration, an approved flashing detail and, in most cases, written sign-off from the roofing manufacturer before anyone cuts the membrane. A non-penetrating anchor removes that conversation entirely. What it does not remove is the strength requirement: the anchorage rules below apply the same way whether the anchor is bolted down or ballasted.\u003c\/p\u003e\n\u003cp\u003eThe three approaches that follow are the ones that actually get specified. We carry equipment in each of them. Where we do not, this page says so.\u003c\/p\u003e\n\n\u003ch3\u003eCounterweight and Deadweight Systems\u003c\/h3\u003e\n\u003cp\u003eA counterweight system is a freestanding rooftop anchor held in place by its own ballast, using mass and friction rather than fasteners to resist fall arrest forces on a flat or low-slope deck.\u003c\/p\u003e\n\u003cp\u003eThis is the category that covers most commercial low-slope work: TPO, EPDM and PVC single-ply roofs, ballasted assemblies, and concrete decks where nothing structural is in reach. The unit is wheeled or hoisted into position, the deck takes the load through the base, and nothing touches the membrane except the bearing surface.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/tie-down-squatch\"\u003eTie Down 61010 Squatch non-penetrating mobile fall protection system\u003c\/a\u003e is a rental unit on our \u003ca href=\"\/collections\/equipment-rentals\"\u003erental fleet\u003c\/a\u003e; it is not offered for sale. Tie Down gives it a gross weight of 1,200 pounds, rates it for use on concrete, TPO and EPDM, and states compliance with OSHA 1926.502 and ANSI\/ASSE Z359.6-2009(D). Paired with a horizontal lifeline it extends leading edge coverage across the deck rather than fixing one worker to one point. If you would rather buy a non-penetrating anchor, the \u003ca href=\"\/products\/standing-seam-roof-anchor\"\u003eMalta Dynamics Standing Seam Roof Anchor\u003c\/a\u003e is the representative unit we sell for standing seam metal roofs. For counterweighted mast and davit units that reach over a parapet or down a shaft, see the \u003ca href=\"\/collections\/xseries\"\u003eMalta Dynamics XSERIES mobile fall protection range\u003c\/a\u003e and the wider \u003ca href=\"\/collections\/mobile-fall-protection\"\u003emobile fall protection systems\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTwo things decide whether ballast is the right answer. First, slope. OSHA defines a low-slope roof at 29 CFR 1926.500(b) as a slope less than or equal to 4 in 12, vertical to horizontal, roughly 18 degrees, and anything steeper is a steep roof. Counterweight systems belong on the flat and low-slope side of that line, and the specific maximum for any unit comes from its manufacturer, not from OSHA. Second, whether the deck can carry the point load. A 1,200 pound unit concentrated on a small footprint is a structural question on an older or lightweight deck, and that is a question for the structural engineer of record, not for the crew on the day.\u003c\/p\u003e\n\n\u003ch3\u003eStanding Seam Clamps\u003c\/h3\u003e\n\u003cp\u003eA standing seam clamp is a non-penetrating anchor that bolts onto the raised vertical seam of a metal roof panel, transferring load into the seam and the panel clips without piercing the weather surface.\u003c\/p\u003e\n\u003cp\u003eOn a standing seam metal roof the seam is the structure you already have, which is why clamping beats ballast here. There is no membrane to protect and no flashing to detail, so the clamp goes on, the work happens, and the clamp comes off leaving the panel unpierced. This is the standard approach on metal roof retrofits, solar racking on metal, and any panel still inside its finish or weathertightness warranty.\u003c\/p\u003e\n\u003cp\u003eWe sell the \u003ca href=\"\/products\/standing-seam-roof-anchor\"\u003eMalta Dynamics standing seam roof anchor\u003c\/a\u003e and the \u003ca href=\"\/products\/2-way-standing-seam-anchor\"\u003ePalmer Safety 2-way standing seam anchor\u003c\/a\u003e. The constraint to respect is fit. Seam profiles are not interchangeable between panel manufacturers, and a clamp sized for one seam geometry is not an anchorage on another. Confirm the profile before the clamp is trusted with a person on it.\u003c\/p\u003e\n\n\u003ch3\u003eG-Clamp and Eave Grappling Systems\u003c\/h3\u003e\n\u003cp\u003eA G-clamp or eave grappling anchor is a non-penetrating device that mechanically grips a parapet wall, a structural beam flange or a roof eave, generating its holding capacity through clamping force instead of fasteners.\u003c\/p\u003e\n\u003cp\u003eThese solve the case where there is a hard edge to grab but no deck worth ballasting and no seam to clamp. A parapet clamp is the common commercial version: it slides over the parapet, the adjustable arm closes onto the wall, and set screws snug it in place. The \u003ca href=\"\/products\/parapet-anchor\"\u003eMalta Dynamics parapet anchor\u003c\/a\u003e is the unit we sell in this category, adjustable for parapet walls from 2.36 inches up to 14.1 inches thick, reusable, and installed without cutting the wall or the roof.\u003c\/p\u003e\n\u003cp\u003eBeing straight about the rest of this category: we do not sell residential eave grappling hooks or gutter-edge grabbing anchors. On residential and low-rise eave work our range is the fastened roof anchors and peak straps listed on this page, and where passive protection is feasible it is the better control anyway, so see \u003ca href=\"\/collections\/guardrails\"\u003eguardrail systems\u003c\/a\u003e. For beam flange clamps, concrete anchors, D-ring plates and cross-arm straps that are not roof-specific, see \u003ca href=\"\/collections\/anchors\"\u003efall protection anchors and anchorage connectors\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eNon-penetrating roof anchor specification comparison\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem type\u003c\/th\u003e\n\u003cth\u003eHow it resists load\u003c\/th\u003e\n\u003cth\u003eSuited to\u003c\/th\u003e\n\u003cth\u003eRoof slope\u003c\/th\u003e\n\u003cth\u003eMembrane and warranty impact\u003c\/th\u003e\n\u003cth\u003eMain constraint\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCounterweight \/ deadweight\u003c\/td\u003e\n\u003ctd\u003eBallast mass and friction against the deck\u003c\/td\u003e\n\u003ctd\u003eFlat and low-slope commercial decks; concrete, TPO, EPDM\u003c\/td\u003e\n\u003ctd\u003eLow-slope only, at or below 4 in 12 per 1926.500(b); manufacturer sets the unit maximum\u003c\/td\u003e\n\u003ctd\u003eNo penetration; membrane and warranty untouched\u003c\/td\u003e\n\u003ctd\u003eDeck must carry the point load; Squatch gross weight is 1,200 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStanding seam clamp\u003c\/td\u003e\n\u003ctd\u003eClamping force on the raised vertical seam\u003c\/td\u003e\n\u003ctd\u003eStanding seam metal roofs only\u003c\/td\u003e\n\u003ctd\u003eFollows the panel; not limited to low-slope\u003c\/td\u003e\n\u003ctd\u003eNo penetration; panel finish warranty untouched\u003c\/td\u003e\n\u003ctd\u003eClamp must match the exact seam profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParapet \/ edge clamp\u003c\/td\u003e\n\u003ctd\u003eClamping force on the parapet wall or beam flange\u003c\/td\u003e\n\u003ctd\u003eFlat roofs with a parapet; steel edges\u003c\/td\u003e\n\u003ctd\u003eNot slope-dependent; depends on the edge\u003c\/td\u003e\n\u003ctd\u003eNo penetration of roof or wall\u003c\/td\u003e\n\u003ctd\u003eWall thickness must be in range; Malta Dynamics parapet anchor covers 2.36 in to 14.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastened roof anchor (for contrast)\u003c\/td\u003e\n\u003ctd\u003eBolts, screws or welds into the structural deck\u003c\/td\u003e\n\u003ctd\u003ePermanent tie-off points on buildings you control\u003c\/td\u003e\n\u003ctd\u003eLow-slope and steep, per the anchor\u003c\/td\u003e\n\u003ctd\u003eCreates a penetration; needs an approved flashing detail and, usually, roofing manufacturer sign-off\u003c\/td\u003e\n\u003ctd\u003eCarries the annual inspection and 10-year recertification duty under 1910.27(b)(1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe strength requirement is identical down every column. Under 29 CFR 1926.502(d)(15) an anchorage used for attachment of personal fall arrest equipment must be independent of any anchorage supporting or suspending platforms and capable of supporting at least 5,000 pounds per employee attached, or designed, installed and used as part of a complete personal fall arrest system maintaining a safety factor of at least two, under the supervision of a qualified person. In general industry 29 CFR 1910.140(c)(13) states the same 5,000 pounds for each employee attached, with the same safety factor of two alternative. Anchorage connectors themselves are manufactured and tested to ANSI\/ASSE Z359.18-2017, the anchorage connector standard within the ANSI Z359 fall protection code, and complete active systems are designed under ANSI\/ASSE Z359.6.\u003c\/p\u003e\n\u003cp\u003eNot sure which of the three fits your deck? Call \u003ca href=\"tel:9499546581\"\u003e949-954-6581\u003c\/a\u003e and describe the roof.\u003c\/p\u003e\n\u003ch2\u003eNon-penetrating roof anchor FAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes a non-penetrating roof anchor still have to hold 5,000 pounds?\u003c\/h3\u003e\n\u003cp\u003eThe anchorage strength requirement does not change with the mounting method. For construction work, 29 CFR 1926.502(d)(15) requires anchorages used for attachment of personal fall arrest equipment to be capable of supporting at least 5,000 pounds per employee attached, or to be designed, installed and used as part of a complete personal fall arrest system that maintains a safety factor of at least two, under the supervision of a qualified person. For general industry, 29 CFR 1910.140(c)(13) sets the same 5,000 pound figure per employee attached and the same safety factor of two alternative.\u003c\/p\u003e\n\u003ch3\u003eWill a non-penetrating anchor void a roof warranty?\u003c\/h3\u003e\n\u003cp\u003eIt is the penetration, not the anchor, that creates the warranty problem. A single-ply membrane warranty is written around an intact membrane and an approved flashing detail at every penetration. Cutting the membrane to bolt or weld an anchor into the deck adds a penetration the roofing manufacturer did not detail, and manufacturers generally require their written approval before new penetrations are made. A ballasted or clamped anchor sits on the assembly instead of through it, which is why it is the usual answer on a roof still under warranty. Confirm the terms with the roofing manufacturer before work starts.\u003c\/p\u003e\n\u003ch3\u003eWhat roof slope can a counterweight anchor be used on?\u003c\/h3\u003e\n\u003cp\u003eOSHA defines a low-slope roof at 29 CFR 1926.500(b) as a roof having a slope less than or equal to 4 in 12, vertical to horizontal, which is about 18 degrees. Above that it is a steep roof. Counterweight and deadweight systems are built for flat and low-slope decks, because they resist load through mass and friction. The maximum slope for any specific unit is set by its manufacturer rather than by OSHA, so check the manual for the model you are using.\u003c\/p\u003e\n\u003ch3\u003eDo standing seam clamps damage the metal panel?\u003c\/h3\u003e\n\u003cp\u003eA standing seam clamp attaches to the raised vertical seam rather than through the panel, so the weather surface is not pierced and no flashing is needed. Some designs use set screws that bear directly on the seam. Seam geometry varies between panel manufacturers, so confirm the clamp is approved for your specific panel profile and seam type before it is used as an anchorage.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does a non-penetrating roof anchor still have to hold 5,000 pounds?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The anchorage strength requirement does not change with the mounting method. For construction work, 29 CFR 1926.502(d)(15) requires anchorages used for attachment of personal fall arrest equipment to be capable of supporting at least 5,000 pounds per employee attached, or to be designed, installed and used as part of a complete personal fall arrest system that maintains a safety factor of at least two, under the supervision of a qualified person. For general industry, 29 CFR 1910.140(c)(13) sets the same 5,000 pound figure per employee attached and the same safety factor of two alternative.\"}},{\"@type\":\"Question\",\"name\":\"Will a non-penetrating anchor void a roof warranty?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is the penetration, not the anchor, that creates the warranty problem. A single-ply membrane warranty is written around an intact membrane and an approved flashing detail at every penetration. Cutting the membrane to bolt or weld an anchor into the deck adds a penetration the roofing manufacturer did not detail, and manufacturers generally require their written approval before new penetrations are made. A ballasted or clamped anchor sits on the assembly instead of through it, which is why it is the usual answer on a roof still under warranty. Confirm the terms with the roofing manufacturer before work starts.\"}},{\"@type\":\"Question\",\"name\":\"What roof slope can a counterweight anchor be used on?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"OSHA defines a low-slope roof at 29 CFR 1926.500(b) as a roof having a slope less than or equal to 4 in 12, vertical to horizontal, which is about 18 degrees. Above that it is a steep roof. Counterweight and deadweight systems are built for flat and low-slope decks, because they resist load through mass and friction. The maximum slope for any specific unit is set by its manufacturer rather than by OSHA, so check the manual for the model you are using.\"}},{\"@type\":\"Question\",\"name\":\"Do standing seam clamps damage the metal panel?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A standing seam clamp attaches to the raised vertical seam rather than through the panel, so the weather surface is not pierced and no flashing is needed. Some designs use set screws that bear directly on the seam. Seam geometry varies between panel manufacturers, so confirm the clamp is approved for your specific panel profile and seam type before it is used as an anchorage.\"}}]}\u003c\/script\u003e","products":[{"product_id":"permanent-roof-anchor","title":"Permanent Roof Anchor","description":"\u003cp\u003e\u003cspan\u003eA permanent roof anchor is a significant part of \u003c\/span\u003e\u003ca href=\"\/products\/byo-personal-fall-arrest-system\"\u003e\u003cspan\u003ePersonal Fall Arrest Systems (PFAS)\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and Fall Restraint Systems used while working on roofs. When attached to the ridge of a wooden roof and used with compatible safety systems, this safety anchor helps limit the forces associated with fall arrest. It was built to be used with other components of a PFAS that limit maximum arrest forces to 900 lbs. or less.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned for wood rooftops and permanent applications, the Malta Dynamics roof safety anchors have two D-Ring ends made from \u003c\/span\u003e\u003cspan\u003etop-quality metal\u003c\/span\u003e\u003cspan\u003e (alloy steel) and an 18″ stainless steel body for an exceptionally long life. Like all products at Malta Dynamics, the Permanent Roof Anchor is entirely compliant with all applicable ANSI and OSHA regulations. The Permanent Anchor is designed for ease of installation and \u003c\/span\u003e\u003cspan\u003ebuilt to withstand the toughest environments, \u003c\/span\u003e\u003cspan\u003eideal for both residential maintenance and construction work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe tensile breaking strength of this rugged stainless steel roof anchor is a minimum of 5,000 lbs. (22.2 kN) in ANSI testing. Even with such powerful capabilities, it weighs just under 1 lb. and features a sleek, discreet appearance. Its unique pre-drilled hole layout also helps minimize truss damage that could occur during installation. Fasteners (nails) are included, too, so you can be confident in the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUsing these permanent roof anchors alongside the right safety harness can help you create safer, easier fall protection for your team. Browse our selection of \u003c\/span\u003e\u003ca href=\"\/collections\/harnesses\"\u003e\u003cspan\u003eharnesses\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"\/collections\/harnesses\"\u003e\u003cspan\u003eharness accessories\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e for high-quality equipment from the industry leaders at Malta Dynamics.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0687\/8258\/7957\/files\/image1-5.png\"\u003e\u003cimg height=\"1155\" width=\"1999\" alt=\"Permanent roof anchor - reliability and safety\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0687\/8258\/7957\/files\/image1-5.png\" title=\"Permanent roof anchor\" class=\"alignnone wp-image-46971 size-full\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eHow to Install a Permanent Roof Anchor\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003ePermanent roof anchor installation is straightforward with this Malta Dynamics fall protection anchor. You can spend less time installing and more time getting to work. Before installing the safety anchor, carefully inspect it, along with the roof’s trusses, rafters, and structural members. You’ll need to ensure the roof is structurally sound and that the permanent roof anchor is not damaged in any way. You will also need to select a site that meets OSHA requirements, including minimized swing fall hazards and a limited free-fall distance of less than 6 feet.\u003c\/p\u003e\n\u003cp\u003eAll employees must be trained by a Competent Person, as defined by OSHA. \u003ca href=\"\/pages\/training\"\u003eExplore our training options\u003c\/a\u003e if your team needs a refresher on fall protection awareness.\u003c\/p\u003e\n\u003cp\u003ePermanent roof anchor installation instructions are as follows:\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eEnsure you are working on a roof constructed of wood, the permanent roof anchor is not designed for metal roof materials. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eRemove 1-2 pieces of the ridge cap if installing on residential roofing with asphalt shingles, shakes, or tile.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eCenter the \u003c\/span\u003e\u003cspan\u003eanchorage device\u003c\/span\u003e\u003cspan\u003e on the ridge of the framing assembly and position it so the nail holes on the center of the legs are directly centered with the middle of the roof framing member.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eUse 16d common nails to secure the bracket with all provided nail holes. No nails should split the timber or protrude through the side of the members\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThese steps are a brief overview of the installation procedures required for this permanent roof anchor for fall protection — see the manual for more comprehensive instructions and use guidelines.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eThe Malta Dynamics Difference\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eMalta Dynamics specializes in quality fall protection systems and is a trusted industry leader providing \u003c\/span\u003e\u003ca href=\"\/collections\/fall-protection\"\u003e\u003cspan\u003esafety equipment\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e throughout the nation. We are a full-service manufacturer that takes care of design, engineering, and manufacturing for fall protection products across many different industries. Our equipment exceeds OSHA requirements and is built in an ISO-17025 laboratory that uses ANSI testing procedures for reliable manufacturing practices. \u003c\/span\u003e\u003cspan\u003eWe \u003c\/span\u003e\u003cspan\u003eemphasize the use of high-strength materials engineered for durability and long-term performance.\u003c\/span\u003e \u003ca href=\"\/collections\/fall-protection\"\u003e\u003cspan\u003ePut safety first\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e with a permanent roof anchor that’s designed for the task and meets OSHA standards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have any questions about the Malta Dynamics Permanent Roof Anchor, please \u003ca href=\"\/pages\/contact\"\u003ereach out to us online\u003c\/a\u003e or at \u003ca href=\"tel:949-954-6581\"\u003e949-954-6581\u003c\/a\u003e!\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/ujtj17tjaxxqlp7m1z9msq7oemczx31v\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/v6b07sttqzmhanbc1i86zd5qsoqs57rg\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/htcgnbsktig4zx4gja7npjp7n24tgk2j\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"Malta Dynamics","offers":[{"title":"10\" Ridge","offer_id":54956186075458,"sku":"A6308","price":20.99,"currency_code":"USD","in_stock":true},{"title":"12\" Ridge","offer_id":54956186108226,"sku":"A6302","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A6302.jpg?v=1783310033"},{"product_id":"reusable-roof-anchor","title":"Reusable Roof Anchor","description":"\u003cp\u003eThe \u003ca href=\"\/products\/byo-personal-fall-arrest-system\"\u003ePersonal Fall Arrest Systems (PFAS)\u003c\/a\u003e and Fall Restraint Systems used while working at heights usually include fall arrest roof anchors. The Malta Dynamics Reusable Roof Anchor is a 21” reusable heavy-duty roof anchor with two moveable legs and a steel D-Ring. These fall arrest roof anchors weigh only 2.4 lbs. and are designed with a discreet profile that’s easy to transport. This reusable roof fall protection anchor is designed for temporary use on wood rooftops and fits a range of roof pitches from flat to 12\/12. The thick zinc plated steel construction gives this reusable roof anchor system a long life and is ideal for supporting workers ranging from 130-310 lbs.\u003c\/p\u003e\n\u003cp\u003eInstructions on how to install a reusable roof anchor are easy to follow. Simply use the pre-drilled holes in the legs as a guide for installation and secure the anchor to the rooftop using screws or the included nail fasteners. This roof fall protection anchor meets or exceeds the safety-oriented requirements of OSHA and ANSI. It meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.18-2017 Type A, and ANSI A10.32-12.\u003c\/p\u003e\n\u003cp\u003eUsing these permanent roof anchors alongside the right safety harness can help you create safer, easier fall protection for your team. Browse our selection of \u003ca href=\"\/collections\/harnesses\"\u003eharnesses\u003c\/a\u003e and \u003ca href=\"\/collections\/harnesses\"\u003eharness accessories\u003c\/a\u003e for high-quality equipment from the industry leaders at Malta Dynamics.\u003c\/p\u003e","brand":"Malta Dynamics","offers":[{"title":"Default Title","offer_id":54956187189570,"sku":"A6303","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A6303-With-Nails.jpg?v=1783310051"},{"product_id":"roof-anchor-standard","title":"Roof Anchor Standard 12\" or 18\"","description":"\u003cp\u003eThe Malta Dynamics Roof Anchor is a fixed-post anchorage solution designed for permanent installation on steel, wood, or concrete rooftops. Available in both 12” and 18” heights, this anchor extends above the finished roof surface to provide a visible, accessible tie-off point, ideal for both new construction and ongoing maintenance work.\u003c\/p\u003e\n\u003cp\u003eChoose the 12” model for standard roof setups, or select the 18” option when working with deeper roof substrates that require additional clearance above flashing, insulation, or decking layers. Both versions are constructed from heavy-duty galvanized steel for long-lasting performance and corrosion resistance in tough weather conditions.\u003c\/p\u003e\n\u003cp\u003eThe round post design fits most standard flashing kits, ensuring a clean, secure install. Each anchor is rated to a 5,000 lb. minimum breaking strength and is fully compliant with ANSI Z359.18-2017, OSHA 1926 Subpart M, and OSHA 1910 standards.\u003c\/p\u003e\n\u003cp\u003eBacked by industry-leading prices and proven performance, the Malta Dynamics Roof Anchor is compatible with self-retracting lifelines (SRLs), vertical lifelines, and shock-absorbing lanyards. It also meets window cleaning system requirements, making it a dependable solution for a wide range of elevated work applications.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/ja01l5a1i82xnabv6rxxreq9wd00e20i\" target=\"_blank\" rel=\"noopener\"\u003eManual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/fg9x1ztys4ehhcpiscb3y56rty8x64wm\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/m1nvq6xtwfn84w0t1pqywwndt6xh9xir\" target=\"_blank\" rel=\"noopener\"\u003eDoC 12\" (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/8maxgqigsiox6865bflb2g23klvxvftf\" target=\"_blank\" rel=\"noopener\"\u003eDoC 18\" (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"Malta Dynamics","offers":[{"title":"12\"","offer_id":54956187255106,"sku":"A6320","price":235.99,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":54956187287874,"sku":"A6321","price":261.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A6320-W.webp?v=1783310053"},{"product_id":"roof-anchor-usa","title":"Roof Anchor USA Edition 12\" or 18\"","description":"\u003cp\u003eThe Malta Dynamics Roof Anchor is a fixed-post anchorage solution designed for permanent installation on steel, wood, or concrete rooftops. Available in both 12” and 18” heights, this anchor extends above the finished roof surface to provide a visible, accessible tie-off point-ideal for both new construction and ongoing maintenance work.\u003c\/p\u003e\n\u003cp\u003eChoose the 12” model for standard roof setups, or select the 18” option when working with deeper roof substrates that require additional clearance above flashing, insulation, or decking layers. Both versions are constructed from heavy-duty galvanized steel for long-lasting performance and corrosion resistance in tough weather conditions.\u003c\/p\u003e\n\u003cp\u003eThe round post design fits most standard flashing kits, ensuring a clean, secure install. Each anchor is rated to a 5,000 lb. minimum breaking strength and is fully compliant with ANSI Z359.18-2017, OSHA 1926 Subpart M, and OSHA 1910 standards.\u003c\/p\u003e\n\u003cp\u003eCompatible with self-retracting lifelines (SRLs), vertical lifelines, and shock-absorbing lanyards, the Malta Dynamics Roof Anchor also meets window cleaning system requirements, making it a dependable solution for a wide range of elevated work applications.\u003c\/p\u003e\n\u003cp\u003eProud to buy American? Prefer the quality? Maybe you're encouraged to source locally? Either way, this Malta Dynamics Roof Anchor's got your back!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0687\/8258\/7957\/files\/made-in-usa.avif?v=1771452879\" alt=\"\" width=\"110\" height=\"115\"\u003e\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/4v7ojrz7oo6y1suyqsovb3shghcezzxm\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/fg9x1ztys4ehhcpiscb3y56rty8x64wm\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/fhuw2w26zhkk3tsufv5g94483r6ph823\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity 12\" (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/seshy255fhqs2wkvy1r0ip9hxdskssd1\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity 18\" (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"Malta Dynamics","offers":[{"title":"12\"","offer_id":54956190204226,"sku":"A6300","price":315.99,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":54956190236994,"sku":"A6301","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A6301-Callout-1.jpg?v=1783310054"},{"product_id":"single-use-roof-anchor","title":"Single Use Roof Anchor","description":"\u003cp\u003e\u003cstrong\u003eMalta Dynamics Single Use Roof Anchor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Malta Dynamics Single Use Roof Anchor is a must-have for any roofer’s safety kit. Designed to bend easily over the roof peak or adjust to match varying roof pitches, this disposable anchor provides a secure tie-off point without causing permanent damage to the structure. Its versatile shape and reliable performance make it ideal for new construction, remodeling, or reroofing projects.\u003c\/p\u003e\n\u003cp\u003eBuilt from durable \u003cstrong\u003ezinc-plated alloy steel\u003c\/strong\u003e, this anchor is both lightweight and strong. It installs quickly using the \u003cstrong\u003eincluded (8) 16d common nails\u003c\/strong\u003e, making setup fast and hassle-free. With a user weight capacity of \u003cstrong\u003e130–310 lbs\u003c\/strong\u003e., this anchor has a \u003cstrong\u003eminimum breaking strength of 5,000 lbs\u003c\/strong\u003e. and is tested to meet \u003cstrong\u003eOSHA 1926.502, OSHA 1910.66\u003c\/strong\u003e, and \u003cstrong\u003eANSI Z359.18-2017\u003c\/strong\u003e standards.\u003c\/p\u003e\n\u003cp\u003eTo ensure maximum safety, always mount the anchor into a solid structural member such as a roof truss or rafter. A fall protection system is only as strong as its anchorage point.\u003c\/p\u003e\n\u003cp\u003eWhether you're tackling a residential remodel, or a commercial reroof, this single-use roof anchor helps you get the job done efficiently and safely.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/un9nd8oznc0i6l3ub30y25dysfuk1jmk\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/br7512z270zv2m1d69n2jmy54l6lz7s5\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/ibhrdb6iiagpwz5hfr3607tjnqug535q\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"Malta Dynamics","offers":[{"title":"Default Title","offer_id":54956190761282,"sku":"A6318","price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A6318-WEB-1.jpg?v=1783310059"},{"product_id":"standing-seam-roof-anchor","title":"Standing Seam Roof Anchor","description":"\u003ch2\u003eWhy Standing Seam Roofs Are Different\u003c\/h2\u003e\n\u003cp\u003eAll types of structures use standing seam roofs, from commercial and residential buildings to industrial complexes. When you work on a standing seam roof, it's not the same as working on other types of roofs. You'll need to approach anchorage differently than other types of roofing. Working on a slanted roof requires careful concentration because it may be easier to fall.\u003c\/p\u003e\n\u003cp\u003eYou also need to use a different type of anchor than for wood and concrete. The anchor point must demonstrate extreme durability while also being strong enough to offer the best fall protection. The anchor should secure to the roof without causing damage.\u003c\/p\u003e\n\u003cp\u003eStanding seam roofs have either symmetrical or asymmetrical panels. The legs are different lengths on the latter and the variances will determine where you stick the anchor point for optimal fall protection. You don’t want the anchor to penetrate the panels, and you must be careful when placing them on the raised interlocking seams that pull each panel together.\u003c\/p\u003e\n\u003cp\u003eWorking on a pitched metal roof requires the utmost care. Taking preventative measures for this job area can keep your workers safe and protect them from injury in the event of a fall. At Malta Dynamics, we offer a standing seam anchor to keep your workers safe on standing seam metal roofs. With our metal roof anchors, your employees can work freely knowing they'll be protected in the event of an accident.\u003c\/p\u003e\n\u003cp\u003eOur standing seam metal roof anchor has a swivel anchor point, allowing workers 360 degrees of motion while they work. We manufacture this product from sturdy aluminum and stainless steel, and our design makes it easy to install with no damage to the roof. In just a few minutes, you can fasten the standing seam safety anchor securely. Once you install this equipment, your workers can attach their self-retracting lifelines (SRLs) and focus on their jobs.\u003c\/p\u003e\n\u003ch2\u003eHow to Ensure the Standing Seam Anchor Points Are in Place\u003c\/h2\u003e\n\u003cp\u003eBe careful not to over-tighten the anchor points on the standing seam. This could dent the roof. Instead, tighten to the point where you can't move it anymore, but not so much that you need to tug the wrench. Test the standing seam safety anchor before you put your total weight on it. Our customers often say they're impressed by how well it holds.\u003c\/p\u003e\n\u003ch2\u003eStay in Compliance With Standing Seam Fall Protection From Malta Dynamics\u003c\/h2\u003e\n\u003cp\u003eYou can protect your workers and your business with the best safety equipment from Malta Dynamics. We have been assisting companies in construction, masonry, manufacturing and many other sectors. We understand what you need, like products that meet OSHA guidelines and fall within strict ANSI requirements.\u003c\/p\u003e\n\u003cp\u003eOrder our standing seam metal roof anchor today to give your workers a better way to secure their SRLs. For more information, feel free to call \u003ca href=\"tel:949-954-6581\"\u003e949-954-6581\u003c\/a\u003e or \u003ca href=\"\/pages\/contact\"\u003ereach out online\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eBuy a Metal Roof Anchor Point Today\u003c\/h2\u003e\n\u003cp\u003eShow your workers that you value their safety when you use the best products available on the market. Our anchor points provide unmatched durability and flexibility you'll appreciate. Place your order online or call us at \u003ca href=\"tel:9499546581\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e949-954-6581\u003c\/a\u003e to ask any questions about our products.\u003c\/p\u003e\n\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/39mhlmor95s2u97lfuhn1mn1csi7dg21\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/8in1cryw3jv2heovidhc08qmff8t5229\" target=\"_blank\" rel=\"noopener\"\u003eAnchor Spec Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/maltadynamics.box.com\/s\/nsvex1pj06t9xrd5tcgzqk9jux8ai7kd\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"Malta Dynamics","offers":[{"title":"Default Title","offer_id":54956191252802,"sku":"A6317","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A6317-WEB-1.jpg?v=1783310064"},{"product_id":"12-roof-anchor-back-plate","title":"12” Roof Anchor Back Plate","description":"\u003cp\u003eBack Plate for 12” Roof Anchor 1\/2” Thick. For Mounting 12” Roof Anchor to Beams or Other Structural Member.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eDESIGN:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtends through roofing so it’s accessible both during and after construction\u003c\/li\u003e\n\u003cli\u003eIntended for permanent locations\u003c\/li\u003e\n\u003cli\u003eCompatible with horizontal lifelines\u003c\/li\u003e\n\u003cli\u003eCompatible for installations onto wood, steel, and concrete substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eSTANDARDS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOSHA 1926 Subpart M \u0026amp; 1910 and ANSI Z359.18-2017 \u0026amp; A10.32 -2012 Type A Anchorage Connector\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGalvanized Steel\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWORKER CAPACITY:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e130 – 420 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003ePERFORMANCE:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Users: 1\u003c\/li\u003e\n\u003cli\u003e5,000 lb. MBS (Minimum Breaking Strength)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum service temperature: -30°F\u003c\/li\u003e\n\u003cli\u003eSuitable for use in combination with HLL Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e33 lbs.\u003c\/p\u003e\n\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR12BACKER-01-1024x1024.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"12” Roof Anchor Back Plate\" fetchpriority=\"high\" height=\"1500\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-ANCHOR12BACKER-01.jpg?v=1787615247\" title=\"ANCHOR12BACKER-01\" width=\"1500\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR12PLATE.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Technical data sheet available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-tech-active-232x300.png?v=1787615789\" title=\"tech-active\" width=\"232\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-12Inch-221116.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Product manual available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-manual-active-232x300.png?v=1787615789\" title=\"manual-active\" width=\"232\"\u003e\u003c\/a\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR12BACKER-01.jpg\" rel=\"noopener\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR12PLATE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-12Inch-221116.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54965180629314,"sku":"ANCHOR12BACKER","price":166.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ANCHOR12BACKER-01.jpg?v=1783518396"},{"product_id":"12-roof-anchor-post","title":"12” Roof Anchor Post","description":"\u003cp\u003e12” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eDESIGN:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtends through roofing so it’s accessible both during and after construction\u003c\/li\u003e\n\u003cli\u003eIntended for permanent locations\u003c\/li\u003e\n\u003cli\u003eCompatible with horizontal lifelines\u003c\/li\u003e\n\u003cli\u003eCompatible for installations onto wood, steel, and concrete substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eSTANDARDS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOSHA 1926 Subpart M \u0026amp; 1910 and ANSI Z359.18-2017 \u0026amp; A10.32 -2012 Type A Anchorage Connector\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGalvanized Steel\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWORKER CAPACITY:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e130 – 420 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003ePERFORMANCE:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Users: 1\u003c\/li\u003e\n\u003cli\u003e5,000 lb. MBS (Minimum Breaking Strength)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum service temperature: -30°F\u003c\/li\u003e\n\u003cli\u003eSuitable for use in combination with HLL Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e23 lbs.\u003c\/p\u003e\n\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR12POST-1024x1024.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"12” Roof Anchor Post\" fetchpriority=\"high\" height=\"1500\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-ANCHOR12POST.jpg?v=1787615247\" title=\"ANCHOR12POST\" width=\"1500\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR12PLATE.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Technical data sheet available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-tech-active-232x300.png?v=1787615789\" title=\"tech-active\" width=\"232\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-12Inch-221116.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Product manual available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-manual-active-232x300.png?v=1787615789\" title=\"manual-active\" width=\"232\"\u003e\u003c\/a\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR12POST.jpg\" rel=\"noopener\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR12PLATE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-12Inch-221116.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54965180662082,"sku":"ANCHOR12POST","price":281.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ANCHOR12POST.jpg?v=1783518396"},{"product_id":"12-roof-anchor-w-baseplate","title":"12” Roof Anchor w\/Baseplate","description":"\u003cp\u003e12” Roof Anchor w\/Baseplate Galvanized Finish, 1\/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eDESIGN:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtends through roofing so it’s accessible both during and after construction\u003c\/li\u003e\n\u003cli\u003eIntended for permanent locations\u003c\/li\u003e\n\u003cli\u003eCompatible with horizontal lifelines\u003c\/li\u003e\n\u003cli\u003eCompatible for installations onto wood, steel, and concrete substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eSTANDARDS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOSHA 1926 Subpart M \u0026amp; 1910 and ANSI Z359.18-2017 \u0026amp; A10.32 -2012 Type A Anchorage Connector\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGalvanized Steel\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWORKER CAPACITY:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e130 – 420 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003ePERFORMANCE:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Users: 1\u003c\/li\u003e\n\u003cli\u003e5,000 lb. MBS (Minimum Breaking Strength)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum service temperature: -30°F\u003c\/li\u003e\n\u003cli\u003eSuitable for use in combination with HLL Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e45 lbs.\u003c\/p\u003e\n\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR12PLATE-1024x1024.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"12” Roof Anchor w\/Baseplate\" fetchpriority=\"high\" height=\"1500\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-ANCHOR12PLATE.jpg?v=1787615247\" title=\"ANCHOR12PLATE\" width=\"1500\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR12PLATE.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Technical data sheet available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-tech-active-232x300.png?v=1787615789\" title=\"tech-active\" width=\"232\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-12Inch-221116.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Product manual available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-manual-active-232x300.png?v=1787615789\" title=\"manual-active\" width=\"232\"\u003e\u003c\/a\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR12PLATE.jpg\" rel=\"noopener\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR12PLATE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-12Inch-221116.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54965180694850,"sku":"ANCHOR12PLATE","price":340.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ANCHOR12PLATE.jpg?v=1783518398"},{"product_id":"18-or-24-roof-anchor-back-plate","title":"18” or 24” Roof Anchor Back Plate","description":"\u003cp\u003eBack Plate for 18” or 24” Roof Anchor Galvanized Steel Backer Plate 5\/8” Thick. For Mounting 18” or 24” Roof Anchor to Beams or Other Structural Member.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eDESIGN:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtends through roofing so it’s accessible both during and after construction\u003c\/li\u003e\n\u003cli\u003eIntended for permanent locations\u003c\/li\u003e\n\u003cli\u003eCompatible with horizontal lifelines\u003c\/li\u003e\n\u003cli\u003eCompatible for installations onto concrete substrates and structural metal beams (with backing plate)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eSTANDARDS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOSHA 1926 Subpart M \u0026amp; 1910 and ANSI Z359.18-2017 \u0026amp; A10.32 -2012 Type A Anchorage Connector\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGalvanized Steel\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWORKER CAPACITY:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e130 – 420 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003ePERFORMANCE:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Users: 1\u003c\/li\u003e\n\u003cli\u003e5,000 lb. MBS (Minimum Breaking Strength)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum service temperature: -30°F\u003c\/li\u003e\n\u003cli\u003eSuitable for use in combination with HLL Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e55 lbs.\u003c\/p\u003e\n\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR24BACKER-01-1024x1024.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"18” or 24” Roof Anchor Back Plate\" fetchpriority=\"high\" height=\"1500\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-ANCHOR24BACKER-01.jpg?v=1787615247\" title=\"ANCHOR24BACKER-01\" width=\"1500\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR18PLATE.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Technical data sheet available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-tech-active-232x300.png?v=1787615789\" title=\"tech-active\" width=\"232\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-24Inch-231030.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Product manual available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-manual-active-232x300.png?v=1787615789\" title=\"manual-active\" width=\"232\"\u003e\u003c\/a\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR24BACKER-01.jpg\" rel=\"noopener\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR18PLATE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-24Inch-231030.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54965180760386,"sku":"ANCHOR24BACKER","price":188.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ANCHOR24BACKER-01.jpg?v=1783518398"},{"product_id":"18-roof-anchor-post","title":"18” Roof Anchor Post","description":"\u003cp\u003e18” Roof Anchor Post Galvanized Finish, Post Only for Weld On Installation, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eDESIGN:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtends through roofing so it’s accessible both during and after construction\u003c\/li\u003e\n\u003cli\u003eIntended for permanent locations\u003c\/li\u003e\n\u003cli\u003eCompatible with horizontal lifelines\u003c\/li\u003e\n\u003cli\u003eCompatible for installations onto wood, steel, and concrete substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eSTANDARDS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOSHA 1926 Subpart M \u0026amp; 1910 and ANSI Z359.18-2017 \u0026amp; A10.32 -2012 Type A Anchorage Connector\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGalvanized Steel\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWORKER CAPACITY:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e130 – 420 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003ePERFORMANCE:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Users: 1\u003c\/li\u003e\n\u003cli\u003e5,000 lb. MBS (Minimum Breaking Strength)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum service temperature: -30°F\u003c\/li\u003e\n\u003cli\u003eSuitable for use in combination with HLL Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e34 lbs.\u003c\/p\u003e\n\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR18PLATE-01-1024x1024.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"18” Roof Anchor Post\" fetchpriority=\"high\" height=\"1500\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-ANCHOR18PLATE-01.jpg?v=1787615248\" title=\"ANCHOR18PLATE-01\" width=\"1500\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR18PLATE.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Technical data sheet available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-tech-active-232x300.png?v=1787615789\" title=\"tech-active\" width=\"232\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-18Inch-221116.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Product manual available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-manual-active-232x300.png?v=1787615789\" title=\"manual-active\" width=\"232\"\u003e\u003c\/a\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR18PLATE-01.jpg\" rel=\"noopener\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR18PLATE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-18Inch-221116.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54965181022530,"sku":"ANCHOR18POST","price":237.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ANCHOR18POST.jpg?v=1783518399"},{"product_id":"18-roof-anchor-w-baseplate","title":"18” Roof Anchor w\/Baseplate","description":"\u003cp\u003e18” Roof Anchor w\/Baseplate Galvanized Finish, 1\/2” Thick Baseplate, 5,000 Lb. MBS, Fixed Connection Point for Single Point Tie-off or HLL Endpoint. Meets or Exceeds OSHA 1910 and 1926 Subpart M, ANSI Z359.18-2017 and ANSI A10.32-2012.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eDESIGN:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtends through roofing so it’s accessible both during and after construction\u003c\/li\u003e\n\u003cli\u003eIntended for permanent locations\u003c\/li\u003e\n\u003cli\u003eCompatible with horizontal lifelines\u003c\/li\u003e\n\u003cli\u003eCompatible for installations onto wood, steel, and concrete substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eSTANDARDS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOSHA 1926 Subpart M \u0026amp; 1910 and ANSI Z359.18-2017 \u0026amp; A10.32 -2012 Type A Anchorage Connector\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMATERIALS:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGalvanized Steel\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWORKER CAPACITY:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e130 – 420 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003ePERFORMANCE:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum Users: 1\u003c\/li\u003e\n\u003cli\u003e5,000 lb. MBS (Minimum Breaking Strength)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum service temperature: -30°F\u003c\/li\u003e\n\u003cli\u003eSuitable for use in combination with HLL Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e50 lbs.\u003c\/p\u003e\n\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR18PLATE-01-1024x1024.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"18” Roof Anchor w\/Baseplate\" fetchpriority=\"high\" height=\"1500\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-ANCHOR18PLATE-01.jpg?v=1787615248\" title=\"ANCHOR18PLATE-01\" width=\"1500\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR18PLATE.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Technical data sheet available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-tech-active-232x300.png?v=1787615789\" title=\"tech-active\" width=\"232\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-18Inch-221116.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Product manual available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-manual-active-232x300.png?v=1787615789\" title=\"manual-active\" width=\"232\"\u003e\u003c\/a\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/ANCHOR18PLATE-01.jpg\" rel=\"noopener\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-ANCHOR18PLATE.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-Roof-Anchor-18Inch-221116.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54965181710658,"sku":"ANCHOR18PLATE","price":410.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ANCHOR18PLATE-01.jpg?v=1783518400"},{"product_id":"large-ring-roof-anchor","title":"Large Ring Roof Anchor","description":"\u003cp\u003eGalvanized steel roof anchor with stamped single large D-Ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017 \u0026amp; A10.32-2012.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eDESIGN:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCan be used in a wide variety of applications\u003c\/li\u003e\n\u003cli\u003eLightweight and durable\u003c\/li\u003e\n\u003cli\u003eCompatible with horizontal lifelines\u003c\/li\u003e\n\u003cli\u003eEasy to Install\u003c\/li\u003e\n\u003cli\u003eReusable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMATERIAL:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eGalvanized steel\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eCAPACITY:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 user: 130 – 420 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eMINIMUM BREAKING STRENGTH:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e5000 lbs.\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eCONFORM TO NORM:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMeets or Exceeds ANSI Z359.18-2017 \u0026amp; A10.32-2012 and OSHA 1926 Subpart M \u0026amp; 1910 Type A Anchorage Connector\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: right;\"\u003e\u003cstrong\u003eWEIGHT:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e2.25 lbs. ± 0.02 lbs\u003c\/p\u003e\n\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/A00153-1.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"Large Ring Roof Anchor\" fetchpriority=\"high\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-A00153-1-300x300.jpg?v=1787615203\" title=\"A00153-1\" width=\"300\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/A00153-2.jpg\" target=\"_blank\"\u003e\u003cimg alt=\"Large Ring Roof Anchor\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-A00153-2-300x300.jpg?v=1787615203\" title=\"A00153-2\" width=\"300\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-A00153.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Technical data sheet available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-tech-active-232x300.png?v=1787615789\" title=\"tech-active\" width=\"232\"\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-A00153-220813.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Product manual available\" height=\"300\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/ps-manual-active-232x300.png?v=1787615789\" title=\"manual-active\" width=\"232\"\u003e\u003c\/a\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/A00153-1.jpg\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/A00153-2.jpg\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDownload Image\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-A00153.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDownload Tech Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Manual-A00153-220813.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54965182824770,"sku":"A00153","price":42.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A00153-1.jpg?v=1783518418"},{"product_id":"reusable-roof-anchor-galvanized-steel-stamped-d-ring","title":"Reusable Roof Anchor, Galvanized Steel, Stamped D-Ring","description":"\u003cp\u003eReusable Roof Anchor. Galvanized Steel with stamped D-ring. Min breaking strength 5000 lbs. Meets or Exceeds ANSI Z359.18-2017. Nails not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn ideal anchorage device to be fixed on wooden beams used in roofing.\u003c\/li\u003e\n\u003cli\u003eConsists of two steel flaps each having 16 holes which can be fitted on the two sides of a wooden beam by means of nails inserted in the holes.\u003c\/li\u003e\n\u003cli\u003eThe D-ring can be safely used as an anchor point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh strength alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder coated or Zinc plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Breaking Strength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5000 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeets or Exceeds ANSI Z359.18-2017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.39 lbs. +\/- 0.02 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/PS-Tech-A00150.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/palmersafetyus.com\/wp-content\/uploads\/A00150-Roof-Anchor-Fastener-Requirements.pdf\" target=\"_blank\" rel=\"noopener\"\u003eRoof Anchor Fastener Requirements (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Safety","offers":[{"title":"Default Title","offer_id":54997342290242,"sku":"A00150","price":25.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/A00150-New-1.jpg?v=1784349754"},{"product_id":"kstrong-single-use-steel-roof-anchor-raised-with-nails-ansi-ufa30015n","title":"KStrong Single Use Steel Roof Anchor, Raised, with Nails (ANSI)","description":"\u003cp\u003eSingle use steel roof anchor, raised, with 8 Nails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn ideal Anchorage device to be fixed on wooden beams used in roofing\u003c\/li\u003e\n\u003cli\u003eConsists of two Steel Flaps each having 8 holes which can be fitted on the two sides of a wooden beam by means of nails inserted in the holes\u003c\/li\u003e\n\u003cli\u003eThe Ø1 in. (25.4mm) hole can be safely used as an Anchor point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Electropolished \/ E Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.94 lbs. ± 0.01 lbs. (0.43kg ± 0.05kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017 Type A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30015N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA30015N.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994208928066,"sku":"UFA30015N","price":13.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA30015N.jpg?v=1793636232"},{"product_id":"kstrong-permanent-use-stainless-steel-17-in-roof-anchor-with-1-ufa30021","title":"KStrong Permanent Use Stainless Steel 17 in. Roof Anchor with 1 Forged D-ring (ANSI)","description":"\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn ideal anchorage device to be fixed on wooden beams used in roofing.\u003c\/li\u003e\n\u003cli\u003eConsists of one stainless steel base plate having 10 holes which can be fixed on wooden beams by means of nails inserted in the holes.\u003c\/li\u003e\n\u003cli\u003eStamped D-ring at one side, can be used safely as an anchorage point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Base Plate: Stainless Steel; D-Ring: High strength alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Base Plate: Electro-polished\/E Coated; D-Ring: Zinc Plated Golden Yellow\/Silver Passivation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum breaking strength:\u003c\/strong\u003e 5000 lbs. (2268 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening of D-ring:\u003c\/strong\u003e 1.7 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.79 lbs. ± 0.02 lbs. (358 gm ± 10 gm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standard:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA30021.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30021.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994208960834,"sku":"UFA30021","price":15.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA30021.jpg?v=1793636233"},{"product_id":"kstrong-25-ft-roofers-kit-with-harness-rope-rope-grab-assembly-ufb101025","title":"KStrong 25 ft. Roofers Kit with harness, rope, rope grab assembly, reusable roof anchor bucket and lid","description":"\u003cp\u003eKStrong 25 ft. Roofers Kit with 5-point Adjustable Harness (size L- XL), 25 ft. Vertical 5\/8 in. Diameter Polysteel Lifeline with snap hook on anchor end, other end taped, 3 ft. shock absorbing rope grab assembly, reusable hinged roof anchor, storage bucket and lid (ANSI).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis lifeline is made up of high strength Polysteel Twisted rope\u003c\/li\u003e\n\u003cli\u003eThe diameter of the rope is 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eIt is provided with snap hook spliced at one end and the other side a stop knot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel snap hook:\u003c\/strong\u003e Made of Alloy Steel; Silver or Golden Yellow Galvanized; Breaking strength 5000 lbs (2268kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity range:\u003c\/strong\u003e ANSI: 130 to 310 lbs; OSHA: 420 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of life line:\u003c\/strong\u003e 25 ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSizes and KStrong part numbers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-XL: UFB101025(L-XL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFB101050L-XL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-VLL-260612.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFB101025.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"L-XL","offer_id":67994209747266,"sku":"UFB101025(L-XL)","price":202.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFB101025-UFB101050-new.jpg?v=1793636239"},{"product_id":"kstrong-50-ft-roofers-kit-with-elite-5-point-mb-leg-harness-size-l-ufb101050","title":"KStrong 50 ft. Roofers Kit with Elite 5-Point MB Leg Harness Size L-XL, Rope, Manual Rope Grab Assembly, Reusable Roof Anchor, Bucket and Lid","description":"\u003cp\u003e50 ft. Roofers Kit with Elite 5-Point MB Leg Harness Size L-XL, 50 ft. Rope, Manual Rope Grab Assembly, Reusable Roof Anchor, Bucket and Lid\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStitching thread:\u003c\/strong\u003e Material: High-tenacity polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal component:\u003c\/strong\u003e Material: Alloy Steel; Finish: Silver or Golden Yellow Galvanized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity range:\u003c\/strong\u003e ANSI: 130 to 310 lbs; OSHA: 420 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polysteel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e Material: High Strength Alloy Steel; Minimum Breaking Strength: 5000 lbs; Finish: Power Coated or Zinc Plated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSizes and KStrong part numbers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-XL: UFB101050(L-XL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFB101050L-XL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/2018\/10\/KStrong-UIM-Harnesses-250930.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFH10201P) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFA30001) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-VLL-260612.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFR100050 and UFG611020) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFH10201P.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFH10201P) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFR100050.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFR100050) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFG611020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFG611020) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30001.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFA30001) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"L-XL","offer_id":67994209780034,"sku":"UFB101050(L-XL)","price":226.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFB101025-UFB101050-new_adcd537e-0325-406f-8458-fff2d231cdfe.jpg?v=1793636241"},{"product_id":"kstrong-25-ft-deluxe-roofers-kit-with-elite-5-point-harness-25-ft-ufb102025","title":"KStrong 25 ft. Deluxe Roofers Kit with Elite+ 5-Point Harness, 25 ft. Rope, Rope Grab Assembly, Reusable Roof Anchor, Trauma Relief Pack (UFB102025)","description":"\u003cp\u003eKStrong 25 ft. Deluxe Roofers Kit with Elite+ 5-Point Harness, 25 ft. Rope, Rope Grab Assembly, Reusable Roof Anchor, Trauma Relief Pack, Bucket and Lid. 25 ft. Deluxe Roofers Kit with Elite+ 5-point harness, 25 ft. rope, rope grab assembly, reusable roof anchor, trauma relief pack, bucket and lid\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal component:\u003c\/strong\u003e Material: Alloy Steel; Finish: PCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity range:\u003c\/strong\u003e ANSI: 130 to 310 lbs; OSHA: 420 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal components:\u003c\/strong\u003e Material: Steel; Plating: Zinc plating; Finish: Deburred \u0026amp; Polished\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e Material: High Strength Alloy Steel; Minimum Breaking Strength: 5000 lbs; Finish: Power Coated or Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polysteel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 25 ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSizes and KStrong part numbers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM-L: UFB102025(M-L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFB102025M-L.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/2018\/10\/KStrong-UIM-Harnesses-250930.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFH15201GQ) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFA30001) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-VLL-260612.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFG611020 and UFR100025) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Trauma-Relief-Straps-210609.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFZ850100) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFH15201GQ.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFH15201GQ) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30001.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFA30001) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFG611020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFG611020) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFR100025.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFR100025) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFZ850100.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFZ850100) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"M-L","offer_id":67994209812802,"sku":"UFB102025(M-L)","price":247.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFB102025.jpg?v=1793636242"},{"product_id":"kstrong-50-ft-roofers-kit-with-elite-5-point-tb-leg-harness-size-m-ufb103050","title":"KStrong 50 ft. Roofers Kit with Elite 5-Point TB Leg Harness Size M-L, rope, rope grab assembly, reusable roof anchor, bucket and lid","description":"\u003cp\u003e50 ft. Roofers Kit with Elite 5-point TB Leg harness size M-L, 50 ft. rope, rope grab assembly, reusable roof anchor bucket and lid\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStitching thread:\u003c\/strong\u003e Material: High-tenacity Polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal component:\u003c\/strong\u003e Material: High Strength Steel; Plating: Zinc Plated; Finish: Shotblasted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity range:\u003c\/strong\u003e ANSI: 130 to 310 lbs; OSHA: 420 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e Material: High Strength Alloy Steel; Minimum Breaking Strength: 5000 lbs; Finish: Power Coated or Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polysteel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50 ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSizes and KStrong part numbers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM-L: UFB103050(M-L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFB103050M-L.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/2018\/10\/KStrong-UIM-Harnesses-250930.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFH10201G) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFA30001) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-VLL-260612.pdf\" target=\"_blank\" rel=\"noopener\"\u003eManual (UFG611020 and UFR100050) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFH10201G.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFH10201G) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30001.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFA30001) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFG611020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFG611020) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFR100050.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (UFR100050) (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"M-L","offer_id":67994209845570,"sku":"UFB103050(M-L)","price":236.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFB103050.jpg?v=1793636243"},{"product_id":"kstrong-25-ft-roofers-boxed-kit-with-harness-rope-rope-grab-ufb501125","title":"KStrong 25 ft. Roofers Boxed Kit with Harness, Rope, Rope Grab Assembly, and Reusable Roof Anchor","description":"\u003cp\u003eKStrong 25 ft. Roofers Boxed Kit with 3-point Adjustable Harness (size L- XL), 25 ft. Vertical 5\/8 in. Diameter Polysteel Lifeline with snap hook on anchor end, other end folded with heat shrink cover, 3 ft. shock absorbing rope grab assembly, and reusable hinged roof anchor (ANSI).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis lifeline is made up of high strength Polysteel Twisted rope\u003c\/li\u003e\n\u003cli\u003eThe diameter of the rope is 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eIt is provided with snap hook spliced at one end and the other side heat shrink wrap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel snap hook:\u003c\/strong\u003e Made of Alloy Steel; Silver or Golden Yellow Galvanized; Breaking Strength 5000 lbs. (2268kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity range:\u003c\/strong\u003e ANSI: 130 to 310 lbs; OSHA: 420 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of life line:\u003c\/strong\u003e 25 ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSizes and KStrong part numbers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL-XL: UFB501125(L-XL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFB501125L-XL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-VLL-260612.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFB501125.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"L-XL","offer_id":67994209911106,"sku":"UFB501125(L-XL)","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFB501125.jpg?v=1793636246"},{"product_id":"kstrong-hinged-reusable-steel-roof-anchor-ansi-ufa30001","title":"KStrong Hinged Reusable Steel Roof Anchor (ANSI)","description":"\u003cp\u003eKStrong hinged reusable galvanized steel roof anchor with D-Ring and powder coated (ANSI)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn ideal anchorage device to be fixed on wooden beams used in roofing.\u003c\/li\u003e\n\u003cli\u003eConsists of two steel flaps each having 16 holes which can be fitted on the two sides of a wooden beam by means of nails inserted in the holes\u003c\/li\u003e\n\u003cli\u003eThe D-Ring can be safely used as an anchorage point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e Material: High Strength Alloy Steel; Minimum Breaking Strength: 5000 lbs; Finish: Power Coated or Zinc Plated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.39 lbs. ± 0.22 lbs. (1084 gm ± 100 gm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA30001.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30001.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211352898,"sku":"UFA30001","price":32.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA30001-new_c672f261-d6e1-49b3-b74d-508c4952a011.jpg?v=1793636299"},{"product_id":"kstrong-reusable-heavy-duty-chain-roof-anchor-ansi-ufa30005","title":"KStrong Reusable Heavy Duty Chain Roof Anchor (ANSI)","description":"\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnchor designed to be installed on various rooftop profiles of wood as well as metal structure\u003c\/li\u003e\n\u003cli\u003eTwo (2) steel plates having 6 holes for wooden nails as well as\u003c\/li\u003e\n\u003cli\u003e6 holes for screws for easy installation on structure\u003c\/li\u003e\n\u003cli\u003eO-ring can be safely used as anchor point for one user at a time\u003c\/li\u003e\n\u003cli\u003eLightweight, easy to install and reusable anchor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High strength alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum breaking strength:\u003c\/strong\u003e 23kN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.09 lbs. ± 0.11 lbs. (2.31kg ± 0.05kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA30005.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30005.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211385666,"sku":"UFA30005","price":80.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA30005-Top.jpg?v=1793636301"},{"product_id":"kstrong-single-use-steel-roof-anchor-ansi-ufa30010","title":"KStrong Single Use Steel Roof Anchor (ANSI)","description":"\u003cp\u003eKStrong Single Use Steel Roof Anchor (ANSI)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn ideal Anchorage device to be fixed on wooden beams used in roofing.\u003c\/li\u003e\n\u003cli\u003eThe D-Ring can be safely used as an Anchor point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy Steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Silver or golden yellow Zinc plated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum breaking strength:\u003c\/strong\u003e 5000 lbs (2268 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.93 lbs. ± 0.02 lbs. (422 gm ± 10 gm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA30010.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFA30010.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211418434,"sku":"UFA30010","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA30010-FA30300-1.jpg?v=1793636302"},{"product_id":"kstrong-single-use-steel-roof-anchor-raised-ansi-ufa30015","title":"KStrong Single Use Steel Roof Anchor, Raised (ANSI)","description":"\u003cp\u003eKStrong Single use steel roof anchor, raised (ANSI).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn ideal Anchorage device to be fixed on wooden beams used in roofing.\u003c\/li\u003e\n\u003cli\u003eThe Ø1 in. (25.4mm) hole can be safely used as an Anchor point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized Steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc Plated Yellow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum breaking strength:\u003c\/strong\u003e 5000 lbs. (2268 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.31 lbs. ± 0.02 lbs. (594 gm ± 10 gm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017 Type A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30015\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA30015.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/DoC-UFA30015.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211451202,"sku":"UFA30015","price":10.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA30015-FA30150-1.jpg?v=1793636304"},{"product_id":"kstrong-permanent-use-stainless-steel-roof-anchor-with-d-rings-ansi-ufa30020","title":"KStrong Permanent Use Stainless Steel Roof Anchor with D-Rings (ANSI)","description":"\u003cp\u003eKStrong Permanent Use Stainless Steel Roof Anchor with D-Rings (ANSI)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn ideal permanent Anchorage device to be fixed on wooden beams used in roofing.\u003c\/li\u003e\n\u003cli\u003eConsists of one stainless steel base plate having 8 holes which can be fixed on wooden beams by means of nails inserted in the holes.\u003c\/li\u003e\n\u003cli\u003eStamped D-ring on both ends, can be used safely as an anchorage point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Base Plate: Stainless Steel; D-Ring: Medium carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Base Plate: Electro-polished; D-Ring: Zinc Plated (Yellow\/Silver )\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum breaking strength:\u003c\/strong\u003e 5000 lbs (2268 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.83 lbs. ± 0.02 lbs. (376 gm ± 10 gm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2007 Type A \u0026amp; OSHA COMPLIANT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30020\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA30020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211516738,"sku":"UFA30020","price":23.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/FA30200-1.jpg?v=1793636306"},{"product_id":"kstrong-standing-seam-swivel-roof-anchor-for-srl-s-ansi-ufa30201","title":"KStrong Standing Seam Swivel Roof Anchor for SRL's (ANSI)","description":"\u003cp\u003eKStrong Swivel receiving anchor for SRL's to be used on standing seam metal decks (ANSI)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnchor post designed to be fixed on standing seam roofs having pitch between 24 in.-36 in.\u003c\/li\u003e\n\u003cli\u003eCompatible with all KStrong range of retractable fall arrester blocks, allowing 360° rotation\u003c\/li\u003e\n\u003cli\u003eEasy to install \u0026amp; reusable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High Strength Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e ED coated black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum breaking strength:\u003c\/strong\u003e 23kN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 37.26 lbs. ± 0.02 lbs. (16900 gm. ± 10 gm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standard:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017 Type A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA30201\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/2019\/05\/KS-Tech-UFA30201.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Stand-Alone-Posts-200528.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA30201.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211582274,"sku":"UFA30201","price":366.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA30201-1.jpg?v=1793636309"},{"product_id":"kstrong-12-in-riser-post-roof-anchor-with-swivel-d-ring-ansi-ufa55207sw-12","title":"KStrong 12 in. Riser Post Roof Anchor with Swivel D-Ring(ANSI)","description":"\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnchor designed to be fixed on metal I Beam to install horizontal lifeline.\u003c\/li\u003e\n\u003cli\u003eThe base have an adjustable opening to adopt to the type of Beam section.\u003c\/li\u003e\n\u003cli\u003eEasy and quick to install with help of nut \u0026amp; bolt (M12).\u003c\/li\u003e\n\u003cli\u003ePost comes with a pre-installed D-ring to make connections.\u003c\/li\u003e\n\u003cli\u003eLENGTH (L)\u003c\/li\u003e\n\u003cli\u003e12 in. (304.8)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with minimum flange width:\u003c\/strong\u003e 5.91 in. (150mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with maximum flange width:\u003c\/strong\u003e 8.66 in. (220mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e ED Coated black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem strength:\u003c\/strong\u003e 23 kN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18.10 lbs. ± 0.44 lbs. (8.21 kgs ± 0.20 kgs).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18 to 2017 Type A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA55207SW(12)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA55207SW12.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA55207SW12.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211647810,"sku":"UFA55207SW(12)","price":177.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA55207SW12-1.jpg?v=1793636312"},{"product_id":"kstrong-18-in-riser-post-roof-anchor-with-swivel-d-ring-ansi-ufa55207sw-18","title":"KStrong 18 in. Riser Post Roof Anchor with Swivel D-Ring (ANSI)","description":"\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnchor designed to be fixed on metal I Beam to install horizontal lifeline.\u003c\/li\u003e\n\u003cli\u003eThe base have an adjustable opening to adopt to the type of Beam section.\u003c\/li\u003e\n\u003cli\u003eEasy and quick to install with help of nut \u0026amp; bolt (M12).\u003c\/li\u003e\n\u003cli\u003ePost comes with a pre-installed D-ring to make connections.\u003c\/li\u003e\n\u003cli\u003eLENGTH (L)\u003c\/li\u003e\n\u003cli\u003e18 in. (457.2mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with minimum flange width:\u003c\/strong\u003e 5.91 in. (150mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with maximum flange width:\u003c\/strong\u003e 8.66 in. (220mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e ED Coated black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem strength:\u003c\/strong\u003e 23 kN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.05 lbs. ± 0.44 lbs. (9.55 kgs ± 0.20 kgs).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standards:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18 to 2017 Type A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA55207SW(18)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA55207SW18.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA55207SW18.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211713346,"sku":"UFA55207SW(18)","price":203.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA55207SW18-2.jpg?v=1793636313"},{"product_id":"kstrong-single-seam-roof-anchor-ansi-ufa55370","title":"KStrong Single Seam Roof Anchor (ANSI)","description":"\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoof top anchor device is designed to be fixed on metal standing seam and I beams to install horizontal life lines.\u003c\/li\u003e\n\u003cli\u003eTrolly lateral hinge (Swivel anchorage eye) on the top provides universal connection and is used as an anchorage point.\u003c\/li\u003e\n\u003cli\u003eThe anchor is fixed on to the roof top by use of Screw set.\u003c\/li\u003e\n\u003cli\u003eCan be installed on up to 0.91 in. (23 mm) bulb size on standing seam roof.\u003c\/li\u003e\n\u003cli\u003eScrews reusable up to 50 cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum Alloy \u0026amp; Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Natural Silver, Anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum breaking strength:\u003c\/strong\u003e 23kN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.84 lbs. ± 0.02 lbs. (834 gm ±10 gm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelevant standard:\u003c\/strong\u003e Meets or Exceeds ANSI Z359.18-2017 Type A\/T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKStrong part number:\u003c\/strong\u003e UFA55370\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eQuestions on fit, compatibility or compliance for your jobsite? Call M Squared Safety at 949-954-6581.\u003c\/p\u003e\n\u003c!-- M2DOCS --\u003e\u003ch3\u003eDocumentation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-Tech-UFA55370.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KStrong-UIM-Metallic-Anchors-260331.pdf\" target=\"_blank\" rel=\"noopener\"\u003eUser Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kstrong.com\/wp-content\/uploads\/KS-DoC-UFA55370.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- \/M2DOCS --\u003e","brand":"KStrong","offers":[{"title":"Default Title","offer_id":67994211811650,"sku":"UFA55370","price":122.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/1379\/5394\/files\/UFA55370-1.jpg?v=1793636315"}],"url":"https:\/\/msquaredsafety.com\/collections\/roof-anchors.oembed?page=2","provider":"M Squared Safety","version":"1.0","type":"link"}